Main menu

Fuses and Fuse Holders

 Fuse Holders

 

 

 

Modular Fuse Holders

The MS range of modular fuse-holders offer fuse protection in four popular frame sizes in voltage ratings up to 660 Va.c. Modular fuse-holders accept cylindrical fuse-links up to a maximum rating of 125 Amps, with principle dimensions of 8.5 x 31.5,10.3 x 38, 14 x 51 and 22 x 58mm.

 

 

 Blade Fuse Disconnector

Fuse-Switch Disconnectors

Enables safe disconnection of the rated current and also of overcurrent up to coupled rated current. A version of this switch-disconnector enables remote signalling of fuse state, in each pole separately. 

  • It is equipped with a label for description of the protected circuit.
  • Measuring holes in the cover.
  • Terminals can be completed with adapters for connection of conductors of cross-section up to 95 mm2.
  • It is possible to lock the switch-disconnector cover.
  • Terminals of the device are adapted for connection of untreated conductors (without sleeves).
  • Available in 1 - 3 pole configurations.
 5x20
 

Electronic / Glass Fuses

  • Miniature Fuse
  • Various Current Ratings from 63mA - 8A
  • 250Vac Voltage Rating
  • 80A Interrupting Rating
  • Glass Body Material
  • 5x20mm Fuse
  • Nickel Plated Brass End Caps

 

Blade 
 

Blade Fuses

 

PNA fuse-links with blade contacts and with utilization category gG feature high breaking capacity, high current limiting capacity and low values of overvoltage during fuse-link action. These fuse-links are suitable for the use in fuse switch-disconnectors, fuse-rails and fuse-bases.

  • The fuse-links do not contain harmful substances according to the RoHS Regulation (cadmium, lead and other).
  • Utilization category gG for protection of lines, cables and other equipment against overload and short-circuit.
  • Utilization category aM for protection of motors, overcurrent relays, contactors and similar devices only against short-circuit.

 

 Cyclindrical
 

Cyclindrical Fuses

  • Small dimensions.
  • High limiting and breaking capacity.
  • Low power losses.
  • The fuse-links do not contain harmful substances according to the RoHS Regulation (cadmium, lead and other).
  • Utilization category gG for protection of lines, cables and other equipment against overload and short-circuit.
  • Utilization category aM for protection of motors,overcurrent relays, contactors and similar devices only against short-circuit.